TLE75620EMTXUMA1
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Current - Output (Max) | 330mA |
| Output Configuration | High Side or Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 3V~28V |
| Fault Protection | Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Turn On Time | 35 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 1 Ω |
| Supply Voltage1-Nom | 13.5V |
| Turn Off Time | 35 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 7V |
| Height Seated (Max) | 1.7mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Surface Mount | YES |
| Supplier Device Package | PG-SSOP-14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
TLE75620EMTXUMA1 Overview
Tape & Reel (TR) is the way it's packaged.A Surface Mount mounting is used for the LED driving board.There is a switch type of Relay, Solenoid Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 8 outputs in the lighting driver.A supply voltage of 3V~5.5V is required for it to operate.The maximum output voltage is N-Channel volts.The termination count is 24.It contains 1 functions.The maximum output of the LED driving board is 330mAV.Using a voltage of 5V allows for high efficiency.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.
TLE75620EMTXUMA1 Features
Supplied from 5V
TLE75620EMTXUMA1 Applications
There are a lot of Infineon Technologies TLE75620EMTXUMA1 Power Switches ICs applications.
- USB Power Distribution
- Solid State Drivers
- Low Voltage I/O System Power
- Hot Swap
- Smartphone and PDA
- Gaming
- Set-Top Boxes
- Notebook and Tablet Computers
- PC Card Hot Swap
- USB3.1 Power Delivery