TLE7230GXUMA1
| Parameters | |
|---|---|
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 15.6mm |
| Width | 7.6mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 20 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLE7230 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Current - Output (Max) | 300mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 60 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 800m Ω |
| Turn Off Time | 60 µs |
TLE7230GXUMA1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package 24-SOIC (0.295, 7.50mm Width) contains it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver has a total of 8 outputs that are available for use.A voltage of 3V~5.5V is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is part of the TLE7230 family of LED drivers.It consists of 24 terminations in total.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 300mAV.The supply voltage of 5V is conducive to high efficiency.As a result, it has a total of 24 pins.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.
TLE7230GXUMA1 Features
Supplied from 5V
TLE7230GXUMA1 Applications
There are a lot of Infineon Technologies TLE7230GXUMA1 Power Switches ICs applications.
- Notebook PC
- Wireless Headsets
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- USB Ports/Hubs
- Set-top-box
- Handheld Devices
- Portable GPS
- HDD, SSD