TLC5946PWRG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Max Output Current | 40mA |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 2.026W |
| Nominal Supply Current | 45mA |
| Power Dissipation | 2.026W |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5946PWRG4 Overview
The TSSOP package is used for saving board space. As a result, it operates based on the frequency of 30MHz.It operates with terminations of 28.This configuration is built upon 28 pins.It is estimated that there are 16 segments.5.5V is an acceptable voltage.There is 17V voltage output from it.28 pins are included in it.In addition, it can be classified as Display Drivers according to its characteristics.It operates at a voltage of 3V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 3V.Currently, the supply current can only reach 5.5V.It is important not to exceed 85°C in order to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.When operating with a 40mA output current, the LED driver delivers all the benefits.An interface IC LED DISPLAY DRIVER is provided with the part.
TLC5946PWRG4 Features
Available in the TSSOP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5946PWRG4 Applications
There are a lot of Texas Instruments TLC5946PWRG4 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Flicker-free LED Lighting using R1580N
- Architectural lighting
- Street lighting
- White LED Backlight for portable equipment
- Linear fluorescent
- Museum lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems