TLC5930PWPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.7W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Base Part Number | TLC5930 |
| Pin Count | 24 |
| Number of Outputs | 12 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.7W |
| Output Current | 40mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5930PWPR Overview
In order to save board space, the led driver uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. Using this LED driver, there are 12 outputs.Surface Mount is used for mounting.In this case, the result is a Linear with high efficiency.It is capable of operating at a temperature of -20°C~85°C TA. As a result, it operates on the basis of frequency 25MHz.24 terminations are designed for its operation.There are 24 pins used to form the base of its configuration.If the voltage supply is lower than 3V, undetermined failures may occur.The segment count is 12.Surface Mount has been mounted with the device.It is under the base part number TLC5930 that the LED driver can be found.3.6V is a maximum acceptable voltage for the supply.It has a voltage output of 17V.24 pins are included in it.In addition, its characteristics are classified into Display Drivers.It achieves maximum efficiency with a minimal voltage supply of 3V.When the supply current should be less than 50mA, the device will provide high efficiency.The current that can be supplied to the load is 40mA.
TLC5930PWPR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 25MHz
Supply voltage of 3.3V
TLC5930PWPR Applications
There are a lot of Texas Instruments TLC5930PWPR LED Driver ICs applications.
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Stage and Studio lighting
- OLED power supply for portable equipment
- Amusement Machines
- Museum lighting
- Linear fluorescent
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- Gallery lighting