TLC374CN-A
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC374 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Supply Current | 600μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 3V~16V ±1.5V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.00003μA |
| Supply Voltage Limit-Max | 18V |
| Max Input Current | 5pA |
| Input Bias Current | 600pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC374CN-A Overview
Electronic comparator is packaged in 14-DIP (0.300, 7.62mm) for convenient transportation.This comparator is of the CMOS, MOS, Open-Drain, TTL output type.This device is designed in Tube case.There are14 terminals on the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical Differential comparator.Electronic comparator has a total of 4 elements.The device is equipped with 14 pins.In general, mounting type Through Hole is recommended.Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.Electronic comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC374 .This comparator presents a quiescent current of 800μA .There is a Through Hole for mounting it on a PCB or other board.Normally, the nominal supply current should be 600μA when using the device.If the current supply exceeds 600μA , the comparator might be damaged.The device can be run with 5V power supplies.You are allowed to input a maximum current of 5pA into the device.The part is based on LinCMOS? .
TLC374CN-A Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 800μA
TLC374CN-A Applications
There are a lot of Texas Instruments TLC374CN-A linear comparators applications.
- Self-diagnostics
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- Power management
- General-Purpose, Low-Voltage Applications
- Window Comparators, Multivibrators
- Automatic Test Equipment
- Wireless Base Stations
- Mobile Communications