TLC075AIPWP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC075 |
| Pin Count | 20 |
| Operating Supply Voltage | 8V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.1mA |
| Nominal Supply Current | 11.6mA |
| Output Current | 57mA |
| Slew Rate | 19V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Output Current per Channel | 57mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0007μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 17V |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 1.4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC075AIPWP Overview
The linear amplifier is packaged in a 20-PowerTSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 20. A total of 20 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 20 pins. Op amp ic rates 390μV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 2.1mA and 10 . Maintain 120dB as the voltage gain. The buffer amp consists of 4 circuits in total. The operating supply voltage of instrumentation amplifier is rated 8V voltage.
TLC075AIPWP Features
20 Pins
supply voltage of 5V
120dB voltage gain
TLC075AIPWP Applications
There are a lot of Texas Instruments TLC075AIPWP Instrumentational OP Amps applications.
- Signal operation
- Non-polarized electrodes
- Cinema or auditorium audio system
- Active probe
- Radar
- Television broadcasting equipment
- High input resistance broadband
- Automation control systems
- Displayers for aircraft and air transportation control systems
- PDA