TL972ID
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | TL972 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Channels | 2 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.75μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.15μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL972ID Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 4mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 2mA . There should be no change in the voltage gain at 80dB. There are a total of 2 channels available on the op amps. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
TL972ID Features
14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail
TL972ID Applications
There are a lot of Texas Instruments TL972ID Instrumentational OP Amps applications.
- Tablets
- High speed sample
- Car stereo
- Automatic control
- Precision measurement
- Displayers for aircraft and air transportation control systems
- Biopotential
- Switching amplifier
- Test equipment
- Inverse/same-phase proportional circuit