TL5580IDR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | TL5580 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Circuits | 2 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 9mA |
| Output Current | 50mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 4V~32V ±2V~16V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 12MHz |
| Max I/O Voltage | 1.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.075μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL5580IDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. An 6mA volt supply current is needed for this linear amplifier to operate. 110dB should be the voltage gain. This op amp ic has 2 circuits. The operating supply voltage of instrumentation amplifier is rated 16V voltage. A TR-shaped amplifier is used to pack the buffer amps.
TL5580IDR Features
8 Pins
supply voltage of 15V
110dB voltage gain
TL5580IDR Applications
There are a lot of Texas Instruments TL5580IDR Instrumentational OP Amps applications.
- Proportional operation circuits
- Wireless base stations
- Micro signal measurement
- Broadcasting
- Communication
- Image computer boards
- Signal transformation
- Information processing
- Automotive sensors
- High gain DC amplifier