TL3016IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 525mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TL3016 |
| Pin Count | 8 |
| Output Type | Complementary, Push-Pull, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 12.5mA |
| Power Dissipation | 525mW |
| Output Current | 20mA |
| Max Supply Current | 12.5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7800 ns |
| Common Mode Rejection Ratio | 97 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 97dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 10μA |
| Dual Supply Voltage | 5V |
| Input Bias Current | 10μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 3mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 97dB CMRR |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL3016IPWR Overview
For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .Output type Complementary, Push-Pull, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a with Latch chip.This is a 1 element comparator.A total of 8 pins are included.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching TL3016 .There is 12.5mA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current for the device be set to 12.5mA .If the current supply exceeds 12.5mA , the comparator could malfunction.There is a maximum current that can be input into the device of 10μA .Often found in ADC circuits, this device is packed in TR .
TL3016IPWR Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12.5mA
TL3016IPWR Applications
There are a lot of Texas Instruments TL3016IPWR linear comparators applications.
- Consumer Medical Electronics
- Wearable Devices
- Alarm and Monitoring Circuits
- Motor drives
- High-Speed Sampling Circuits
- Battery-Powered Electronics
- Window Comparators
- Zero-Crossing Detectors
- High-Speed Differential Line Receiver
- RC Timers