TL3016IPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 525mW |
| Nominal Supply Current | 12.5mA |
| Power Dissipation | 525mW |
| Max Supply Current | 12.5mA |
| Current - Output | 20mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 12.5mA |
| Response Time | 7.8 ns |
| Amplifier Type | COMPARATOR |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 10μA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 97dB |
| Max Input Current | 10μA |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TL3016IPWG4 Overview
The product is packaged in TSSOP to facilitate transportation.The comparator has an output type of TTL .There are 8 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The device contains 8 pins.The comparator has a pin count of 8 .There is a quiescent current of 12.5mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 12.5mA .If the current supply exceeds 12.5mA , the comparator might be damaged.There is a maximum current that can be input into the device of 10μA .An increase in temperature over 85°C is not recommended.Comparator electronics is not suComparator electronicsable for temperatures below -40°C .10V is the maximum supply voltage of the comparator.A minimum supply voltage of 5V is permitted for this comparator.For the output quality to be maintained, 1 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.The output current of this device is rated 20mA .
TL3016IPWG4 Features
TTL output capability
Quiescent Current: 12.5mA
COMPARATOR amplifier
TL3016IPWG4 Applications
There are a lot of Texas Instruments TL3016IPWG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Ultra-Low Power Systems
- Portable and Battery-Powered Systems
- System control and monitoring
- Point of load regulators
- Window Comparators
- Set Top Boxes
- Security Detection Systems
- Notebooks and PDAs
- Body Control Modules