TL16C754BPNRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C754 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Number of I/O | 8 |
| Nominal Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C754BPNRG4 Overview
Alternatively, UART can be purchased in the cost-effective 80-LQFP package.Transmission is carried out over 4, QUART channels.When UART comes to packaging, Tape & Reel (TR) is adopted as the packaging method.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.A configuration of 80 terminations is used.To operate it, 5V is provided as the supply voltage.Currently, this electronic part is Obsolete.As a means of communicating data, there are 4 serial I/Os available.The mount can be accessed via the Surface Mount method.UART operates on a voltage of 2.7V~5.5V.UART is a type of 80-pin integrated circuUART.This IC measures its clock frequency at 50MHz.In light of numerous similarities, it is included in the subcategory of Serial IO/Communication Controllers.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.The 80 pins form the basis for its configuration.The mount is done using Surface Mount.Its high-efficiency operation depends on a supply voltage of 5V.In addition, it has the capability of performing ALSO OPERATES AT 3.3V SUPPLY.Basically, it uses TL16C754 as its base part number.To transfer data, there are 8 I/Os.
TL16C754BPNRG4 Features
4 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
8 I/Os
TL16C754BPNRG4 Applications
There are a lot of Texas Instruments TL16C754BPNRG4 UARTs applications.
- Domestic Applications
- Factory Automation
- GPS Devices
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Infrared Transceivers
- Factory Automation and Process Controls
- White goods
- Cellular data devices
- Ethernet Network Routers
- Personal Digital Assistants Modules