TL16C752BPT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Voltage - Rated DC | 3.3V |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Current Rating | 6mA |
| Base Part Number | TL16C752 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Memory Size | 64B |
| Operating Supply Current | 20mA |
| Nominal Supply Current | 20mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height | 1.4mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C752BPT Overview
The package 48-LQFP offers the best value.UART is possible to transmUART on 2, DUART channels.Tray is used in terms of packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.The configuration uses 48 terminations.The device operates at 3.3V voltage.The current status of this electronic part is Obsolete.As a means of transferring data, there are 2 serial I/Os.Mounting it through Surface Mount is possible.UART operates wUARTh the supply voltage of 2.7V~3.6V.UART is a type of 48-pin integrated circuUART.Considering its similarities, it belongs to the Serial IO/Communication Controllers subcategory.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.The operating temperature should be in excess of 85°C to ensure the normal work for a long time.The configuration of this device is based on the 48 pins.The mount is done using Surface Mount.3.3V is the supply voltage provided for high-efficiency operation.In order to identify this part, its base part number is TL16C752.With a supply current of 20mA, it is suitable for a variety of applications.There is 64B of memory that holds various pieces of information.
TL16C752BPT Features
2 serial I/Os
Operating supply voltage of 3.3V
TL16C752BPT Applications
There are a lot of Texas Instruments TL16C752BPT UARTs applications.
- Communications equipment
- Point-of- Sale Terminals
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Telecommunication Network Routers
- Multi-port RS-232/RS-422/RS-485 Cards
- Wireless Infrared Data Communications Systems
- Multimedia Systems
- Universal PCI Bus Add-in Card
- Factory Automation and Process Controls
- Network Management