TL16C552APN
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Printer Port |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Current Rating | 50mA |
| Base Part Number | TL16C552 |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Memory Size | 16B |
| Operating Supply Current | 50mA |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | IBM PC-AT |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C552APN Overview
UART is available in the cost-effective 80-LQFP package.Transmission is carried out over 2, DUART channels.When UART comes to packaging, Tray is adopted as the packaging method.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.A configuration of 80 terminations is used.During operation, it receives a voltage of 5V.As of right now, this electronic part is in a Obsolete status.There are 2 serial I/Os available for communication of data.You can mount it by using Surface Mount.UART operates on a voltage of 4.75V~5.25V.In this case, the electronic device is a type of integrated circuit with 80 pins.This IC operates at a clock frequency of 16MHz.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of -40°C.To ensure long-term operation, the operating temperature should not exceed 85°C.As its configuration basis, the 80 pins are used.There are some characteristics of Printer Port in it.Using Surface Mount, it is mounted.If a power supply of 5V is available, electronic designers can use it with confidence.Its high-efficiency operation depends on a supply voltage of 5V.As a base part number, it is specified as TL16C552.The supply current of 50mA is an allowable maximum value.Suitable for specific applications, it runs at a supply current of 50mA.There is a lot of information stored in the memory with a size of 16B.
TL16C552APN Features
2 serial I/Os
Clock frequency of 16MHz
Power supplies of 5V
Operating supply voltage of 5V
TL16C552APN Applications
There are a lot of Texas Instruments TL16C552APN UARTs applications.
- Communications equipment
- Serial to Parallel/Parallel to Serial Converter
- Multimedia Systems
- Industrial computing
- Point-of-Sale Systems
- GPS Devices
- Universal PCI Bus Add-in Card
- Portable and battery operated devices
- Personal Digital Assistants
- Multi serial ports RS-232/RS-422/RS-485 Cards