TL16C550DIPTR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 181.692094mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.25V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16C550 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16C550DIPTR Overview
In the 48-LQFP package, you can get the product at a low cost.Transmissions are made using 1, UART channels.Tape & Reel (TR) is adopted as the packaging option.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.Configured with 48 terminations.In order for it to operate, a voltage of 5V must be provided.The status of this electronic part is currently Active.Data communication is supported by 1 serial I/Os.A method of mounting it is through Surface Mount.UART operates on a voltage of 2.25V~5.5V.There are 48 pins on this electronic device.In this IC, the clock frequency is 24MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.To maintain normal work for a long time, the operating temperature should not exceed -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.A device's configuration is based on its 48 pins.The mount is done using Surface Mount.The supply voltage of 5V is provided for its high-efficiency operation.Additionally, it is also able to perform ALSO OPERATES AT 2.5V/3.3V SUPPLY and other operations as well.The base part number of the part is set to TL16C550.The supply current of 8mA is an allowable maximum value.
TL16C550DIPTR Features
1 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 2.5V/3.3V SUPPLY
TL16C550DIPTR Applications
There are a lot of Texas Instruments TL16C550DIPTR UARTs applications.
- Telecommunication Network Routers
- Multimedia Systems
- Portable and battery operated devices
- Cellular Phones DataPort
- Battery Operated Electronics
- Remote Access Servers
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Handheld Computers
- Ethernet Network Routers
- Cellular Data