TL031ID
| Parameters | |
|---|---|
| Base Part Number | TL031 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 217μA |
| Nominal Supply Current | 280μA |
| Output Current | 40mA |
| Slew Rate | 5.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 81.58dB |
| Average Bias Current-Max (IIB) | 0.0009μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 1.5mV |
| Power | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
TL031ID Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a J-FET type op amp. The op amp is delivered to you in a Tube case. We are approaching the 8h termination of the year. A total of 8 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 217μA . Op amp is a member of the 81.58dB's 81.58dB family. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 15V.
TL031ID Features
8 Pins
supply voltage of 5V
81.58dB voltage gain
TL031ID Applications
There are a lot of Texas Instruments TL031ID Instrumentational OP Amps applications.
- Signal filtering
- PDA
- Radiation thermometry transducers
- Automation control systems
- Medical imaging
- Automatic control
- Gaming industry
- Thermocouples
- Industrial control system
- Comparator