TEA3718DP
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES A 10 TO 45 V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TEA3718 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 510/45V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 25mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Voltage - Load | 10V~45V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 5.1mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TEA3718DP Overview
There is a Tubepackage included in the design.Drivers controllers is packaged wDrivers controllersh a 16-DIP (0.300, 7.62mm) case.The part should be mounted by Through Hole.I believe it would be suitable for the component connected to General Purpose.A device with a voltage range of 4.75V~5.25V volts is available.This device operates at a temperature of 0°C~150°C TJ.This part provides 16terminations.In this case, the voltage can be applied to the load at the rate of 10V~45V.Please take in mind that this amplifier should be run at 5V.There is a recommended mounting method of Through Hole.Maintain a current of 1.5Afor the part output.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.Drivers controllers is based on the TEA3718 part number.This device is designed with a pin count of 16.The Motion Control Electronicsseries contains it.A characteristic ALSO REQUIRES A 10 TO 45 V SUPPLYis also associated with it.
TEA3718DP Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on TEA3718 number
Additional Feature: ALSO REQUIRES A 10 TO 45 V SUPPLY
TEA3718DP Applications
There are a lot of STMicroelectronics TEA3718DP motor drivers applications.
- Running preventive- maintenance diagnostics
- parking lights
- Human-centric lighting
- Mobile phone display backlight and key light driving
- Digital still cameras
- AM radio
- Hazardous application
- Hidden coves in high-end residential settings
- Building technology
- Large format LED backlighting