TC7W125FU(TE12L,F)
| Parameters | |
|---|---|
| Control Type | ENABLE LOW |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| Published | 1997 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation-Max | 300mW |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 20μA |
| Propagation Delay | 10 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 165 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
TC7W125FU(TE12L,F) Overview
Logical driver uses a neat SSOP package. Tape and Reel external packaging. All of the 2 elements are put into use. 8 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the HC/UH family's comprehensive benefits and features. 8 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 8 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 2μA. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 7.8mA to its low level. In high level output mode, the electronic parts may conduct -7.8mA of current. Voltage used to run voltage buffer should be 2V at least. In regard to the maximum supply voltage, buffer driver is rated 6V. It is known as a BUS DRIVER logic IC.
TC7W125FU(TE12L,F) Features
Bus Driver/Transceivers
High Level Output: 7.8mA
Low Level Output: -7.8mA
BUS DRIVER Logic IC
TC7W125FU(TE12L,F) Applications
There are a lot of Toshiba TC7W125FU(TE12L,F) Buffers & Transceivers applications.
- Fiber-to-the-desktop
- Wireless access points
- Automation systems
- Mainframes, workstations or storage devices
- Desktop radio
- Wireless communication
- Indoor ad hoc meeting
- Thermal management
- transmission relay
- Structural bonding