TC1039CECHTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Tape and Reel |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 6 |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 10μA |
| Current - Output | 1mA |
| Response Time | 4 μs |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 100pA |
| Output Current per Channel | 1mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC1039CECHTR Overview
For convenience, it is packaged in SOT-23-6 .This device is designed in Tape and Reel case.The comparator has a total of 6 terminals.The electrical component in this case belongs to the Comparator family.When supplied with 3V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .A total of 6 pins are included.6 pins are available on the comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 10μA .If the current supply exceeds 10μA , the comparator might be damaged.In order to run the device, there are only 2/5V power supplies required.A voltage gain of 100dB can be determined from the voltage formula for the part.Comparator electronics is not recommended to operate at a temperature higher than 85°C .A temperature lower than -40°C is unsuitable for the device.In the comparator, the maximum supply voltage is 5.5V .A minimum supply voltage of 1.8V is permitted for this comparator.To ensure a high level of output quality, 1 channels work together.There is 1mA output current for this device.
TC1039CECHTR Features
General Purpose IC
Voltage Gain: 100dB
TC1039CECHTR Applications
There are a lot of Microchip Technology TC1039CECHTR linear comparators applications.
- Mobile Communications
- Limit Comparators
- Set Top Boxes
- Power management
- General Purpose Low Voltage Applications
- Self-diagnostics
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Battery management and protection
- Wireless Base Stations