T6817-TKQY
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Applications | Bulbs, DC Motors, Resistors |
| HTS Code | 8542.31.00.01 |
| Technology | BCDMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | T6817 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Output Current-Max | 0.01A |
| Voltage - Load | 5.5V~40V |
| Current - Output / Channel | 600mA |
| Fault Protection | ESD, Open Load Detect, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 1.5 Ω LS (Max), 2 Ω HS (Max) |
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 1.45mm |
| Length | 6.75mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
T6817-TKQY Overview
For packaging, Tape & Reel (TR) is used.Cost savings are achieved by including H bridge in the 20-TSSOP (0.173, 4.40mm Width) package.Improved reliabilbridge drivery can be ensured based on the supply voltage of 4.5V~5.5V.In Surface Mount, H bridge circuit is mounted.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver has many applications, including Bulbs, DC Motors, Resistors.Full bridge also has a number of specific characteristics, including Status Flag.It is possible to terminate a transmission line with a 20 termination using the H bridge which matches the characteristic impedance of the transmission line.Based on its base H bridge ic number of T6817, further related H bridge ics can be identified.For the operation of the H bridge, a voltage supply of 5V is used.H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.
T6817-TKQY Features
Available in 20-TSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : T6817
T6817-TKQY Applications
There are a lot of Microchip Technology T6817-TKQY Full Bridge Drivers, Half-Bridge Drivers applications.
- Telecom Microprocessor
- Desktop Computers
- Audio-visual equipment
- Workstations
- High-Performance Gaming Motherboards
- Quad DC motor
- Notebook Computers
- Voltage Regulators for DDR memory arrays
- V-Core
- Home Appliances