STMPS2171STR
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 130mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STMPS2171 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 40μA |
| Output Configuration | High Side |
| Power Dissipation | 130mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2171STR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The STMPS2171 family consists of this type.There are 5 terminations in it.It is necessary to use the 5 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 1A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.A total of 5 pins are present on it.It has a resistance of 120mOhm.This case results in a 0A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.For its operation, a current of 40μA is required.
STMPS2171STR Features
Supplied from 5V
Resistance of 120mOhm
STMPS2171STR Applications
There are a lot of STMicroelectronics STMPS2171STR Power Switches ICs applications.
- USB Power Distribution
- HDD, SSD
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Hot Swaps
- USB Power Distribution
- Solid-State Drives
- Mobile Communication Devices
- Notebook PC
- PDAs