STM32L151RCT6ATR
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | STM32L1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Max Power Dissipation | 290mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 32MHz |
| Base Part Number | STM32L151 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 21x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 9 |
| ROM (words) | 262144 |
| Core Architecture | ARM |
| EEPROM Size | 8K x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32L151RCT6ATR Overview
There is an option to purchase it in the 64-LQFP package, which saves space. The way of mounting it is Surface Mount. It comes in the package?of a Tape & Reel (TR). A ARM? Cortex?-M3 core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 51 I/Os are available on this device. Based on its base part number of STM32L151, other similarly-sized components can be found. The position of the device is QUAD at terminal. There are a total of 64 terminations in it. The STM32L1 series contains this electrical component. The supply voltage of 3V allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. There are 64 pins used in the construction of this device. Data and programs can be stored on the devices with a memory size of 256kB. Its core architecture is ARM. This device achieves excellent efficiency at frequencies of 32MHz. In total, there are 9 timers and counters. A supply voltage (Vsup) above 1.8V is necessary for normal operation. It works with an oscillator type Internal.
STM32L151RCT6ATR Features
64-LQFP package
Mounting type of Surface Mount
STM32L151RCT6ATR Applications
There are a lot of STMicroelectronics STM32L151RCT6ATR Microcontroller applications.
- Accu-check
- Kindle
- Hard drives
- Automatic staplers
- Glucose monitoring systems (for Type 1 Diabetes)
- Process control devices
- Teletext terminals
- Hand-held metering systems
- Microwave ovens
- Walkie talkies