STK672-622A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Operating Temperature | -20°C~105°C TC |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 0 TO 46 SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| JESD-30 Code | R-XZFM-T19 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 500mV |
| Operating Supply Voltage | 46V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7.3W |
| Current - Output | 1.2A |
| Logic Function | AND |
| Voltage - Load | 0V~46V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-622A-E Overview
The design includes a package of type [0].Drivers controllers comes in a 19-SSIP Formed Leads case.In general, it is recommended that the part be mounted by Through Hole.I believe it would be suitable for the component connected to General Purpose.A device with a voltage range of 4.75V~5.25V volts is available.The operating temperature ranges from -20°C~105°C TCto -20°C~105°C TC.In this part, there are 19 terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 0V~46V.Drivers controllers is important to remember that this amplifier should be run at 5V.There is a recommended mounting method of Through Hole.Maintain a current of 1.2Afor the part output.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.In the Motion Control Electronicsseries, it is included.Drivers controllers operates from a voltage of 46V volts.A voltage of 500mVis maintained at the output.There is also a characteristic ALSO OPERATES IN 0 TO 46 SUPPLYassociated with it.
STK672-622A-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
Additional Feature: ALSO OPERATES IN 0 TO 46 SUPPLY
STK672-622A-E Applications
There are a lot of ON Semiconductor STK672-622A-E motor drivers applications.
- Display LED backlighting
- Automotive applications
- Indicator circuit
- LED bias
- Large format LED backlighting
- Horticultural applications
- Scanning equipment
- Accurate LED current matching
- Tunnel lights
- Camcorders