STK672-110-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SIP |
| Number of Pins | 12 |
| Operating Temperature | 150°C TJ |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 2.6mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 6.5W |
| Current - Output | 2.1A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 1.8A |
| Voltage - Load | 10V~42V |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height | 26mm |
| Length | 32.5mm |
| Width | 8.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-110-E Overview
This package was designed with Bulkin mind.12-SIPcases are included with the part.To mount the part by [0], it is recommended that you do so.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device can supply 4.75V~5.25V volts.There is a temperature range of 150°C TJin which this device operates.A total of 12terminations are available in the part.The voltage can applied to the load at the rate of 10V~42V.Please take in mind that this amplifier should be run at 5V.A Through Holemounting method is recommended for this product.Maintain a current of 2.1Afor the part output.Drivers controllers is based on the STK672 part number.This device is designed with a pin count of 12.Drivers controllers belongs to Motion Control Electronics series.Steppercan be recognized as a motor type.
STK672-110-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK672 number
Motor Type classified as Stepper
STK672-110-E Applications
There are a lot of ON Semiconductor STK672-110-E motor drivers applications.
- Horticultural lighting
- Fog lamps
- Scanning equipment
- Outdoor area lights
- Large format LED backlighting
- Tail lights
- Telltale lights
- Hazardous application
- Automotive instrumentation
- Camera-enabled smartphones