STK672-060-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 22-SIP |
| Number of Pins | 22 |
| Operating Temperature | 150°C TJ |
| Packaging | Bulk |
| Published | 2004 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 22 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 2.4V |
| Max Output Current | 1.6A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 14mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7W |
| Current - Output | 1.2A |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1.6A |
| Voltage - Load | 10V~45V |
| Switching Frequency | 57kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 9mm |
| Length | 53mm |
| Width | 22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-060-E Overview
The design contains a Bulkpackage.Drivers controllers comes in a 22-SIP case.Ideally, the part should be mounted by Through Hole.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 4.75V~5.25V volts.Operation temperature ranges from 150°C TJ.This part has 22termination options.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 5V.Ideally, it should be mounted in the Through Holeposition.Maintain a current of 1.2Afor the part output.According to the STK672part number, the part is found.22pins are available on the device.Drivers controllers is part of the series [0].1outputs are available in total.The output voltage is maintained at 2.4V.Steppercan be recognized as a motor type.Its maximal output current reaches 1.6A to meet the operation requirements.
STK672-060-E Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on STK672 number
designed with 1 outputs
Motor Type classified as Stepper
STK672-060-E Applications
There are a lot of ON Semiconductor STK672-060-E motor drivers applications.
- Monitoring the energy that the luminaire uses
- Multiple output capability
- Large format LED backlighting
- High power LED street light
- drivers for outdoor application
- Commercial office
- Landscape lighting
- Hazardous application
- Industrial high-bay lights
- Indicator circuit