SNJ54S299W
| Parameters | |
|---|---|
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-GDFP-F20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| Power Supply Current-Max (ICC) | 225mA |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 2.45mm |
| Length | 13.09mm |
| Width | 6.92mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54S299W Overview
20 is the number of terminations on the chip. There is 5V operating supply voltage listed on the part. There is an electronic component in the S. Additionally, please note the following: HOLD MODE. For this part, Vsup should not be less than 4.5V. The device is capable of delivering voltage at 5V. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. There are 8 bits on the IC chip. It has a total of zero pins. It belongs to the subcategory of Shift Registers. It should only be used at temperatures no greater than 125°C.
SNJ54S299W Features
It supplies 5V power
SNJ54S299W Applications
There are a lot of Texas Instruments SNJ54S299W Shift Registers applications.
- Pulse Extenders
- Parallel to serial converter
- Serial to parallel converter
- Cache memory in CPU
- data manipulation
- Data manipulation
- Parallel data
- Output expansion
- Remote control holding register
- Counter