SNJ54S194FK
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 20 |
| Pbfree Code | no |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 18.5 ns |
| Family | S |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 70 MHz |
| Height Seated (Max) | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54S194FK Overview
20 is the total number of terminations on the chip. 5V is the operating supply voltage of the part. 1 elements make up this part. The device is equipped with 20 pins. The mounting method should be Surface Mount. The electronic component belongs to the S. It's noted that the chip's operating supply voltage is in the range 5V. There are also the following additional considerations in this section: HOLD MODE. A voltage of 5V is possible with this device. It has 4 bits in total. In total, there are 20 pins on it. Using it below 125°C is recommended. Operation of this device requires a value greater than -55°C. This supply voltage is employed under 5.5V. A voltage higher than 4.5V is used as a supply voltage.
SNJ54S194FK Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54S194FK Applications
There are a lot of Texas Instruments SNJ54S194FK Shift Registers applications.
- store data in digital form
- Remote control holding register
- Serial to parallel converter
- Pseudo Random Pattern Generator
- Sequence generator
- Parallel data
- 8-bit data storage
- Pulse Extenders
- data transfer
- Dual-rank shift, hold, and bus applications