SNJ54LS674W
| Parameters | |
|---|---|
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 24 |
| Additional Feature | HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| JESD-30 Code | R-CDFP-F24 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Family | LS |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 40mA |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 2.29mm |
| Length | 14.36mm |
| Width | 9.09mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS674W Overview
Taking the total number of terminations on the chip and adding them up, we get 24. 5V is the part's operating supply voltage. Electronic components belong to the LS group. Additional aspects of this section are as follows: HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. There must be a minimum supply voltage (Vsup) of 4.5V for this part. This part should not have a supply voltage (Vsup) greater than 5.5V. A total of 16 bits are present on an IC chip. In total, there are 24 pins on it. It belongs to the subcategory of Shift Registers. It should only be used at temperatures no greater than 125°C.
SNJ54LS674W Features
SNJ54LS674W Applications
There are a lot of Texas Instruments SNJ54LS674W Shift Registers applications.
- temporary data storage
- 7-segment display control
- Remote control holding register
- Serial to parallel converter
- Delay Line
- Remote control holding register
- data transfer
- Output expansion
- Counter
- Flash Memory