SNJ54LS673JT
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 24 |
| Number of Terminations | 24 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 16 |
| Propagation Delay | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Prop. Delay@Nom-Sup | 40 ns |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 80mA |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 5.08mm |
| Length | 32mm |
| Width | 6.92mm |
| Thickness | 4.7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS673JT Overview
There is an embedded device in the package CDIP. There are 24 terminations on the chip. There is 5V operating supply voltage listed on the part. It is a part that has 1 elements on it. In this device, there are 24 pins. The recommended mounting method is Through Hole. An electronic component is included in the LS. It's noted that the chip's operating supply voltage is in the range 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER; COMMON SERIAL I/O PIN. The total number of IC chip bits is 16. This board has 24 pins in total. Temperatures below 125°C are recommended for use. It should not be lower than -55°C to operate this device. A voltage of this type is employed under 5.5V. Voltages higher than 4.5V are used for this supply. To package the part, TUBE is used.
SNJ54LS673JT Features
With 24 pins
Operate supply voltage at 5V
Packing Method : TUBE
SNJ54LS673JT Applications
There are a lot of Texas Instruments SNJ54LS673JT Shift Registers applications.
- Output expansion
- Pattern Recognizers
- Parallel to serial converter
- Flash Memory
- Data Format Converters
- 8-bit data storage
- temporary data storage
- 7-segment display control
- Cache memory in CPU
- LED matrix control