SNJ54LS595J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Packing Method | TUBE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 65mA |
| fmax-Min | 20 MHz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS595J Overview
In package CDIP, there is an embedded device. Chip terminations add up to 16. There is 5V operating supply voltage listed on the part. 1 elements make up this part. 16 pins are located on the device. As a general recommendation, mounting by Through Hole is recommended. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED. Devices with voltage delivery capabilities of 5V are available. There are 8 bits on the IC chip. It has a total of zero pins. Under temperatures below 125°C, it is recommended to use it. For this device to operate, it cannot be lower than -55°C. Under 5.5V, this voltage is employed. There is a voltage applied to the supply that is greater than 4.5V. TUBE is used to package the part.
SNJ54LS595J Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
Packing Method : TUBE
SNJ54LS595J Applications
There are a lot of Texas Instruments SNJ54LS595J Shift Registers applications.
- Remote control holding register
- store data in digital form
- Pulse Extenders
- Sequence generator
- Pattern Recognizers
- Serial to parallel converter
- Data Processors
- Generate time delay toward digital circuits
- temporary data storage
- Remote control holding register