SNJ54LS395AJ
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 4 |
| Family | LS |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 30 ns |
| Power Supply Current-Max (ICC) | 31mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS395AJ Overview
CDIP is a package containing the embedded device. There are 16 terminations on the chip. The part's operating supply voltage is rated 5V. The electronic component belongs to the LS. Additionally, please note the following: TOTEMPOLE SERIAL SHIFT RIGHT OUTPUT. This part must have a minimum supply voltage (Vsup) of 4.5V. A voltage of 5V is possible with this device. This part requires a maximum supply voltage (Vsup) of 5.5V. A total of 4 bits are present on the IC chip. There are a total of 16 pins on it. There is a subcategory of it called Shift Registers. You should not use it above 125°C.
SNJ54LS395AJ Features
It supplies 5V power
SNJ54LS395AJ Applications
There are a lot of Texas Instruments SNJ54LS395AJ Shift Registers applications.
- Generate time delay toward digital circuits
- LED matrix control
- Remote control holding register
- Delay Line
- 8-bit data storage
- Parallel to serial converter
- data transfer
- Output expansion
- Sequence generator
- Serial to parallel converter