SNJ54LS299W
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 40 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 39 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 53mA |
| Height | 2.45mm |
| Length | 13.09mm |
| Width | 6.92mm |
| Thickness | 1.84mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS299W Overview
Taking the total number of terminations on the chip and adding them up, we get 20. A Rail/Tube case holds it. Its operating supply voltage is rated at 5V. 1 elements make up this part. It is equipped with a pin count of 20. It is recommended that the mount should be done by Surface Mount. An electronic component is included in the LS. According to the specification, this chip's operating supply voltage falls within the range of 5V. The following additional aspects of this section are worth noting: HOLD MODE. A device capable of delivering voltage at 5V can be used. The total number of IC chip bits is 8. The pin count is 20. A temperature below 125°C is recommended for its use. Operation of this device requires a value greater than -55°C. A voltage of 5.5V is employed as the supply voltage. It is important to note that this supply voltage is higher than 4.5V.
SNJ54LS299W Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS299W Applications
There are a lot of Texas Instruments SNJ54LS299W Shift Registers applications.
- Data manipulation
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- temporary data storage
- Data Processors
- Parallel to serial converter
- Sequence generator
- Generate time delay toward digital circuits
- Pattern Recognizers