SNJ54LS194AW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Pbfree Code | no |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 23mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2.03mm |
| Width | 6.73mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS194AW Overview
16 is the number of terminations on the chip. It is packed in a case number Rail/Tube. Voltage rating of the part is 5V. On this part, there are 1 elements. 16 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of LS. It is noted that this chip uses an operating supply voltage of 5V. Taking note of the following additional details: HOLD MODE. There is a possibility of delivering voltage at 5V. IC chip bits total 4. This board has 16 pins in total. Temperatures below 125°C are recommended for use. For this device to work, it should not go below -55°C. A voltage of this type is employed under 5.5V. This supply voltage is employed higher than 4.5V.
SNJ54LS194AW Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS194AW Applications
There are a lot of Texas Instruments SNJ54LS194AW Shift Registers applications.
- Serial-to-parallel data conversion
- Remote control holding register
- Cache memory in CPU
- temporary data storage
- Dual-rank shift, hold, and bus applications
- data manipulation
- 8-bit data storage
- Generate time delay toward digital circuits
- LED matrix control
- Flash Memory