SNJ54LS194AJ
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 26 ns |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 23mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS194AJ Overview
As a result, CDIP package contains the embedded device. A total of 16 terminations can be found on the chip. It is packed in a case number Rail/Tube. Voltage rating of the part is 5V. On this part, there are 1 elements. 16 pins are available on the device. It is recommended to mount by Through Hole in order to get the best results. It is a component of the LS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: HOLD MODE. It can deliver voltage at 5V. IC chip bits total 4. The pin count is 16. It should be used below 125°C. For this device to work, it should not go below -55°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 4.5V.
SNJ54LS194AJ Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS194AJ Applications
There are a lot of Texas Instruments SNJ54LS194AJ Shift Registers applications.
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Counter
- Output expansion
- Data Format Converters
- Serial-to-parallel data conversion
- Pattern Recognizers
- Delay Line
- Data manipulation
- Remote control holding register