SNJ54LS165AJ
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 35 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS165AJ Overview
Embedded in a package of type CDIP, the device is available for use. There are 16 terminations on the chip. A Rail/Tube case holds it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. In this device, there are 16 pins. Using Through Hole as a mount point is recommended. An electronic component is included in the LS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. Voltage can be delivered at 5V. IC chips contain a total of 8 bits. The pin count is 16. Under 125°C, it is recommended that it be used. In order to operate the device, the value should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. It is used at a higher voltage than 4.5V.
SNJ54LS165AJ Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS165AJ Applications
There are a lot of Texas Instruments SNJ54LS165AJ Shift Registers applications.
- LED matrix control
- 7-segment display control
- Serial-to-parallel data conversion
- Data Format Converters
- Dual-rank shift, hold, and bus applications
- 8-bit data storage
- data manipulation
- ROM Chips
- Pulse Extenders
- Flash Memory