SNJ54HC595W
| Parameters | |
|---|---|
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-GDFP-F16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 300 ns |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 21000000Hz |
| Height Seated (Max) | 2.03mm |
| Length | 10.16mm |
| Width | 6.73mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54HC595W Overview
Chip terminations add up to 16. Voltage rating of the part is 5V. Electronic components are categorized as HC/UH. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part must have a minimum supply voltage (Vsup) of 2V. The device is capable of delivering voltage at 2/6V. In this part, the maximum supply voltage (Vsup) should not exceed 6V. IC chip bits total 8. The pin count is 16. The subcategory in which it falls belongs to is Shift Registers. Temperatures above 125°C must be avoided.
SNJ54HC595W Features
It supplies 2/6V power
SNJ54HC595W Applications
There are a lot of Texas Instruments SNJ54HC595W Shift Registers applications.
- Serial to parallel converter
- data transfer
- Serial-to-parallel data conversion
- Output expansion
- 7-segment display control
- Interconnectors
- Flash Memory
- Remote control holding register
- temporary data storage
- Remote control holding register