SNJ54HC595J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Prop. Delay@Nom-Sup | 34 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 25 MHz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54HC595J Overview
There is a CDIP package embedded with the device. Chip terminations add up to 16. A voltage of 5V is specified for the part's operating supply. This part has 1 elements. There are 16 pins on the device. It is recommended that the mount should be done by Through Hole. Electronic components belong to the HC/UH group. According to the specification, this chip's operating supply voltage falls within the range of 5V. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It has a total of 8 pins. There are a total of 16 pins on it. At temperatures below 125°C, it is recommended for use. For this device to work, it should not go below -55°C. A voltage of 6V is employed as the supply voltage. Voltages higher than 2V are used for this supply. TUBE is the way the part is packaged.
SNJ54HC595J Features
With 16 pins
Operate supply voltage at 5V
Packing Method : TUBE
SNJ54HC595J Applications
There are a lot of Texas Instruments SNJ54HC595J Shift Registers applications.
- Counter
- Delay Line
- 7-segment display control
- Serial-to-parallel data conversion
- data transfer
- Flash Memory
- Data Processors
- Interconnectors
- Parallel data
- Serial-to-parallel data conversion