SNJ54HC195FK
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Propagation Delay | 225 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 25 MHz |
| Height Seated (Max) | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54HC195FK Overview
20 is the total number of terminations on the chip. Presented in a case of Rail/Tube. The part operates at 5V voltage. A total of 1 elements are present on this part. 20 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. This electronic component is classified as HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. A total of 4 bits are present on the IC chip. The total number of pins is 20. Using it below 125°C is recommended. It should not be less than -55°C when operating this device. A voltage of this type is employed under 6V. It is necessary to use a voltage that is higher than 2V to provide this supply.
SNJ54HC195FK Features
With 20 pins
Operate supply voltage at 5V
SNJ54HC195FK Applications
There are a lot of Texas Instruments SNJ54HC195FK Shift Registers applications.
- Parallel data
- Output expansion
- 7-segment display control
- Serial-to-parallel data conversion
- Cache memory in CPU
- LED matrix control
- Data Format Converters
- 8-bit data storage
- Counter
- Serial to parallel converter