Parameters |
Surface Mount |
YES |
Pbfree Code |
no |
Number of Terminations |
20 |
Additional Feature |
HOLD MODE |
HTS Code |
8542.39.00.01 |
Subcategory |
Shift Registers |
Technology |
TTL |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
JESD-30 Code |
S-CQCC-N20 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
125°C |
Operating Temperature (Min) |
-55°C |
Supply Voltage-Max (Vsup) |
5.5V |
Temperature Grade |
MILITARY |
Supply Voltage-Min (Vsup) |
4.5V |
Load Capacitance |
50pF |
Number of Bits |
4 |
Family |
AS |
Output Polarity |
TRUE |
Logic IC Type |
PARALLEL IN PARALLEL OUT |
Screening Level |
MIL-PRF-38535 |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
8 ns |
Power Supply Current-Max (ICC) |
60mA |
fmax-Min |
75 MHz |
Count Direction |
BIDIRECTIONAL |
Height Seated (Max) |
2.03mm |
Length |
8.89mm |
Width |
8.89mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
SNJ54AS194FK Overview
Chip terminations add up to 20. There is 5V operating supply voltage listed on the part. In this case, the electronic component belongs to the AS. Additionally, please note the following: HOLD MODE. There should be no less than 4.5V supply voltage (Vsup) for this part. This part requires a maximum supply voltage (Vsup) of 5.5V. There are 4 bits in the IC chip. It has a total of zero pins. Shift Registers is its subcategory. No temperature higher than 125°C should be used.
SNJ54AS194FK Features
SNJ54AS194FK Applications
There are a lot of Texas Instruments SNJ54AS194FK Shift Registers applications.
- LED matrix control
- Interconnectors
- Remote control holding register
- Pseudo Random Pattern Generator
- Pattern Recognizers
- Sequence generator
- ROM Chips
- 7-segment display control
- Flash Memory
- Delay Line