SNJ54ALS323J
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 40mA |
| Height | 5.08mm |
| Length | 24.2mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54ALS323J Overview
There is a CDIP package embedded with the device. 20 is the number of terminations on the chip. There is a Rail/Tube case containing it. 5V is the part's operating supply voltage. 1 elements make up this part. The device is equipped with 20 pins. It is recommended to mount by Through Hole. This electronic component is classified as ALS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. A device capable of delivering voltage at 5V can be used. There are 8 bits on the IC chip. It has a total of zero pins. The product should be used at temperatures below 125°C. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. A voltage higher than 4.5V is used as a supply voltage.
SNJ54ALS323J Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54ALS323J Applications
There are a lot of Texas Instruments SNJ54ALS323J Shift Registers applications.
- Serial-to-parallel data conversion
- Serial to parallel converter
- Counter
- Data Processors
- Parallel to serial converter
- Dual-rank shift, hold, and bus applications
- Cache memory in CPU
- Flash Memory
- Output expansion
- Delay Line