SNJ54ALS299J
| Parameters | |
|---|---|
| Power Supply Current-Max (ICC) | 40mA |
| Height | 5.08mm |
| Length | 24.2mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 38 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
SNJ54ALS299J Overview
As a result, CDIP package contains the embedded device. This chip has a total termination count of 20. It is packed in a case number Rail/Tube. Voltage rating of the part is 5V. 1 elements are present in this part. 20 pins are located on the device. As a general recommendation, mounting by Through Hole is recommended. Electronic components are categorized as ALS. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. There is a possibility of delivering voltage at 5V. A total of 8 bits are present on an IC chip. 20 pins are present on it. It should be used below 125°C. This device should not be operated below -55°C. A voltage of 5.5V is used to supply this voltage. A voltage higher than 4.5V is used as a supply voltage.
SNJ54ALS299J Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54ALS299J Applications
There are a lot of Texas Instruments SNJ54ALS299J Shift Registers applications.
- Generate time delay toward digital circuits
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Interconnectors
- Parallel data
- Data manipulation
- Parallel to serial converter
- Data Processors
- 7-segment display control
- temporary data storage