SNJ54ALS165W
| Parameters | |
|---|---|
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | CLOCK INHIBIT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| JESD-30 Code | R-GDFP-F16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Bits | 8 |
| Family | ALS |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 15 ns |
| fmax-Min | 35 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 2.03mm |
| Length | 10.16mm |
| Width | 6.73mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54ALS165W Overview
16 is the number of terminations on the chip. 5V is the operating supply voltage of the part. Electronic components fall under the category of ALS. There are also the following additional considerations in this section: CLOCK INHIBIT. The minimum supply voltage (Vsup) for this part should not be less than 4.5V. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup). There are 8 bits in the IC chip. This board has 16 pins in total. Temperatures higher than 125°C should not be used.
SNJ54ALS165W Features
SNJ54ALS165W Applications
There are a lot of Texas Instruments SNJ54ALS165W Shift Registers applications.
- Serial to parallel converter
- ROM Chips
- Sequence generator
- Data Processors
- Pulse Extenders
- Generate time delay toward digital circuits
- Delay Line
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion
- Counter