SNJ54ALS165J
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | CLOCK INHIBIT |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Family | ALS |
| Logic Function | Shift Register |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 24mA |
| fmax-Min | 35 MHz |
| Count Direction | RIGHT |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54ALS165J Overview
There is an embedded device in the package CDIP. This chip has a total termination count of 16. Parts with a 5V operating supply voltage are specified. It is a part that has 1 elements on it. 16 pins are present on the device. Through Hole is recommended for mounting. Electronic components fall under the category of ALS. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: CLOCK INHIBIT. There is a capability to deliver voltage at 5V. IC chip bits total 8. 16 pins are present on it. It should be used below 125°C. For this device to operate, it cannot be lower than -55°C. It is used under the 5.5V supply voltage. It is important to note that this supply voltage is higher than 4.5V.
SNJ54ALS165J Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54ALS165J Applications
There are a lot of Texas Instruments SNJ54ALS165J Shift Registers applications.
- Flash Memory
- Output expansion
- 8-bit data storage
- Interconnectors
- LED matrix control
- Data Format Converters
- Dual-rank shift, hold, and bus applications
- ROM Chips
- Data Processors
- temporary data storage