SNJ5496J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 5 |
| Family | TTL/H/L |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 68mA |
| fmax-Min | 10 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ5496J Overview
This device can be found embedded within the package CDIP. It sums up to 16 where the chip's terminations add up. There is 5V operating supply voltage listed on the part. In this device, there are 16 pins. Electronic components are categorized as TTL/H/L. Additional aspects of this section include: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. There should be no less than 4.5V supply voltage (Vsup) for this part. Devices with voltage delivery capabilities of 5V are available. This part requires a maximum supply voltage (Vsup) of 5.5V. The total number of IC chip bits is 5. In total, there are 16 pins on it. In its subcategory, it is listed under Shift Registers. Use it only at temperatures below 125°C.
SNJ5496J Features
With 16 pins
It supplies 5V power
SNJ5496J Applications
There are a lot of Texas Instruments SNJ5496J Shift Registers applications.
- Parallel data
- Remote control holding register
- 7-segment display control
- Data Processors
- Serial to parallel converter
- Delay Line
- store data in digital form
- Output expansion
- Flash Memory
- Pseudo Random Pattern Generator