SNJ5495AJ
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Additional Feature | SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | TTL/H/L |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 32 ns |
| Power Supply Current-Max (ICC) | 63mA |
| fmax-Min | 36 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ5495AJ Overview
There is a CDIP package embedded with the device. 14 is the number of terminations on the chip. The part operates at 5V voltage. 14 pins are provided on the device. The electronic component belongs to the TTL/H/L. Additionally, please note the following: SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD. This part should have a minimum supply voltage (Vsup) of at least 4.5V. A voltage of 5V is possible with this device. A maximum supply voltage (Vsup) of 5.5V may be applied to this part. The total number of IC chip bits is 4. This board has 14 pins in total. Shift Registers is its subcategory. It should only be used at temperatures no greater than 125°C.
SNJ5495AJ Features
With 14 pins
It supplies 5V power
SNJ5495AJ Applications
There are a lot of Texas Instruments SNJ5495AJ Shift Registers applications.
- LED matrix control
- Serial-to-parallel data conversion
- ROM Chips
- Cache memory in CPU
- Remote control holding register
- Parallel to serial converter
- Pattern Recognizers
- 8-bit data storage
- Remote control holding register
- Output expansion