SN75LBC184P
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 75LBC184 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-485 |
| Operating Supply Current | 25mA |
| Nominal Supply Current | 25mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 300 ns |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.004A |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LBC184P Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Through Hole-type PCB or development board, you can install this wide receiver.A differential driver like this uses 4.75V~5.25V of power.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.This transceiver is packaged with 8 market standard pinoutsWith the part number 75LBC184 identifying the product type, temperature, package, etc., you can search with it to see more variants.An enhanced power dissipation driver IC with 8 pins.A combination of optical transceiver downsizing and high-density Through Hole mounting reduces the package size dramatically.It was possible to achieve a 1-bit resolution through this ic receiver.There are typically 1 bits of resolution specified in the specifications of this receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.ICs implement a total of 1 transceivers.This integrating circuit is able to drive LEDs with an input voltage of 25mA.
SN75LBC184P Features
Tube package
8 pin count
8 pins
5V power supply
SN75LBC184P Applications
There are a lot of Texas Instruments SN75LBC184P Drivers/Receivers/Transceivers applications.
- transmission relay
- Precision engineering measurement
- Bridges
- Cell phones
- Wireless modems
- Structural bonding
- Cable network front end
- Routers
- Single to Multimode Fiber Conversion
- Vehicle