SN75478P
| Parameters | |
|---|---|
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Nominal Supply Current | 75mA |
| Power Dissipation | 1W |
| Output Current | 300mA |
| Propagation Delay | 350 ns |
| Input Type | Inverting |
| Turn On Delay Time | 350 ns |
| Output Characteristics | STANDARD |
| Turn-Off Delay Time | 125 ns |
| Output Polarity | TRUE |
| Input Characteristics | GATED |
| Rise / Fall Time (Typ) | 50ns 90ns |
| Interface IC Type | OR GATE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.35 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Current - Peak Output (Source, Sink) | 500mA 500mA |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.35 µs |
| Built-in Protections | TRANSIENT |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75478 |
| Pin Count | 8 |
| Output Voltage | 100V |
SN75478P Overview
For greater flexibility, the 8-DIP (0.300, 7.62mm) package is adopted.A package of Tube has been used.Gate drivers is configured wGate driversh 2 drivers.Through Hole is mounted in the way of the device.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4.5V~5.5V.Temperature range 0°C~70°C TA is allowed for this device.Inverting is used as the input type in this program.The configuration starts with 8 terminations.Many related parts can be found under its base part number SN75478.You mount it with Through Hole.In the device, there are 8 pins.In addition, it is specifically designed to operate with a supply voltage of 5V.Mosfet driver utilizes the interface IC OR GATE BASED PERIPHERAL DRIVER.Several electronic components are included in its subcategory of Peripheral Drivers.The component has 8 pins.The output current of this device can be set to 300mA.According to its maximum power dissipation, 1W is capable of conducting and transferring a large amount of power without overheating.Based on its power supplies of 5V, it solves the problem of power supply failure for a variety of applications.In this case, the voltage is 100V.The operating supply voltage should be set at 5.5V.A gate driver in this series is included in the Automotive, AEC-Q100 series.This function has an input of GATED.
SN75478P Features
Embedded in the Tube package
2 drivers
8 pins
Maximum power dissipation of 1W
Operating with the supply voltage of Automotive, AEC-Q100
SN75478P Applications
There are a lot of Texas Instruments SN75478P gate drivers applications.
- Portable Media Players
- Digitally controlled power supplies
- Automotive Applications
- Industrial Modules
- High-voltage isolated DC-DC converters
- RGB applications
- Portable computers
- Dual-Battery Systems
- General Purpose 3-Phase Inverter
- High power buffers