Parameters |
Package / Case |
PDIP |
Surface Mount |
NO |
Pbfree Code |
no |
Number of Terminations |
20 |
Additional Feature |
HOLD MODE; COMMON I/O PINS |
HTS Code |
8542.39.00.01 |
Technology |
TTL |
Terminal Position |
DUAL |
Terminal Form |
THROUGH-HOLE |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
70°C |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Supply Voltage-Min (Vsup) |
4.75V |
Load Capacitance |
45pF |
Number of Bits |
8 |
Family |
S |
Logic Function |
Shift Register |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Logic IC Type |
PARALLEL IN PARALLEL OUT |
Trigger Type |
POSITIVE EDGE |
Propagation Delay (tpd) |
21 ns |
Power Supply Current-Max (ICC) |
225mA |
fmax-Min |
50 MHz |
Count Direction |
BIDIRECTIONAL |
Max Frequency@Nom-Sup |
50000000Hz |
Height Seated (Max) |
5.08mm |
Length |
25.4mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
SN74S299N Overview
There is a PDIP package embedded with the device. 20 is the total number of terminations on the chip. Voltage rating of the part is 5V. Electronic components fall under the category of S. This section has the following additional features: HOLD MODE; COMMON I/O PINS. This part must have a minimum supply voltage (Vsup) of 4.75V. There is a capability to deliver voltage at 5V. This part requires a maximum supply voltage (Vsup) of 5.25V. A total of 8 bits are present on the IC chip. In total, there are 20 pins on it. Temperatures greater than 70°C should not be used.
SN74S299N Features
It supplies 5V power
SN74S299N Applications
There are a lot of Texas Instruments SN74S299N Shift Registers applications.
- store data in digital form
- Flash Memory
- Parallel data
- Pseudo Random Pattern Generator
- 8-bit data storage
- Pulse Extenders
- Remote control holding register
- Generate time delay toward digital circuits
- Interconnectors
- Serial to parallel converter