SN74S195N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 16.5 ns |
| Power Supply Current-Max (ICC) | 109mA |
| fmax-Min | 70 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74S195N Overview
There is an embedded device in the package PDIP. Taking the total number of terminations on the chip and adding them up, we get 16. 5V is the operating supply voltage of the part. It is a component of the S. There are also the following additional considerations in this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. This part should have a minimum supply voltage (Vsup) of at least 4.75V. A voltage of 5V is possible with this device. It should not exceed 5.25V in terms of the supply voltage (Vsup). A total of 4 bits are present on the IC chip. 16 pins are on it. It should only be used at temperatures no greater than 70°C.
SN74S195N Features
It supplies 5V power
SN74S195N Applications
There are a lot of Texas Instruments SN74S195N Shift Registers applications.
- Data Processors
- store data in digital form
- Data Format Converters
- Remote control holding register
- Data manipulation
- Parallel to serial converter
- data manipulation
- 7-segment display control
- 8-bit data storage
- Pattern Recognizers