SN74S195D
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | S |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 16.5 ns |
| Power Supply Current-Max (ICC) | 109mA |
| fmax-Min | 70 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74S195D Overview
SOIC is a package containing the embedded device. A total of 16 terminations can be found on the chip. A voltage of 5V is specified for the part's operating supply. It is a component of the S. The following additional elements are important to note: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. For this part, the minimum supply voltage (Vsup) should not be less than 4.75V. It can deliver voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). A total of 4 bits are present on an IC chip. In total, there are 16 pins on it. The subcategory of this item is Shift Registers. No temperature higher than 70°C should be used.
SN74S195D Features
It supplies 5V power
SN74S195D Applications
There are a lot of Texas Instruments SN74S195D Shift Registers applications.
- Output expansion
- 7-segment display control
- Flash Memory
- Parallel data
- store data in digital form
- data transfer
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- ROM Chips
- Pattern Recognizers