SN74LVCH16373ADLR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVCH16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | INDEPENDENT CONTROL |
| Independent Circuits | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVCH16373ADLR Overview
The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). Tape & Reel (TR) is the way it is packaged. The output it is configured with uses Tri-State. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 1.65V~3.6V. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74LVCH series. Electronic parts with 16 bits are designed for this application. A device with this design has 48 terminations. It is a member of the 74LVCH16373 family. The supply voltage of the device is 1.8V. 48 pins are available on it. This electronic device is categorized as a LVC/LCX/Z electronic device. There are 48 pins on it. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the Bus Driver/Transceiver subcategory. A voltage greater than 1.65V must be supplied as a power supply (Vsup). This device is well suited for TR based on its reliable performance. With 24mA, maximum design flexibility is ensured. 3 output lines generate the binary equivalent of the input lines. The current consumed by the device is 20μA volts in quiescent mode, which cannot be affected by external factors. 8 circuits are used to provide this superior level of flexibility.
SN74LVCH16373ADLR Features
48-BSSOP (0.295, 7.50mm Width) package
74LVCH series
16 Bits
74LVCH16373 family
48 pin count
48 pins
SN74LVCH16373ADLR Applications
There are a lot of Texas Instruments SN74LVCH16373ADLR Latches applications.
- Shift left with parallel loading
- Flip-flops
- Shift register
- Serial Output Register
- Stacked or Push-Down Registers
- Buffer register
- Programmable binary
- Automatic test equipment
- Multistage ripple counting
- Multi-line decoders